|Distance between centers||400 mm|
|Maximum speed||3550 rpm|
Automatic feed (s): Longitudinal and transverse feed Spindle
Nose intake: Camlock
Cone in main spindle: MC5 (in instead of MC4 with a DR1 (L) (S))
Thread cutting: Yes
Bracket gearbox: Yes
Hardened bed: Yes and in good condition! Lower guideway not collapsed or something!
Cone in the tailstock: MC3 (instead of MC2 with a DR1 (L) (S)
Sony digital readout on the longitudinal displacement only -Guard with switch off switch to the spindle
Stop with switch off switch to the spindle motor
Camlock independent four-jaw with reversible jaws
Rapid quick change system with 6 chisel holders -> NEW original Italian Rapid
Quick clamping device for collets
55 piece C5 collet set; 1 to 28mm with a half mm ascending -> NEW
Clamp holder with printing option
Tension rod for the C5 collets
Tension for the tie rod
Complete set of change wheels consisting of 16 pieces for all threads, also sprocket 97
Rotating center MC3
Fixed center MC3
Drill chuck MC3
Automatic cooling with hose and nozzle
All the necessary keys
Hembrug Ergonomic documentation including 4 books in which everything about turning is elaborated; from beginner to professional!
500 kilograms heavier than the well-known DR1 (L) (S) models from Ai Hembrug.
Stop -Camlock three-claw with inner, outer and soft claws, brand Forkardt (diameter 160mm) -> equipped with the system with quick adjustment of the claws, super practical
*Information can sometimes be inaccurate and change without notice!