Deckel Maho DMU 100T - Vertical Machining Centre - 2002
Sold
Specifications
| Manufacturer | Deckel Maho |
| Model | DMU 100T |
| Year | 2002 |
| Condition | Used |
| Made in | Germany |
| Control unit | Heidenhain TNC530i |
| Working hours | 30750H |
| X-axis travel | 1080 mm |
| Y-axis travel | 710 mm |
| Z-axis travel | 710 mm |
| Feed axis X / Y / Z | 30 m / min |
| Number axis | 5 |
| Table length | 1500 mm |
| Table width | 800 mm |
| Table load | 900 kg |
| Tool holders | 32 |
| Spindle taper | SK40 |
| Spindle speed | 18000 rpm |
| Spindle motor | 30 kW |
| Dimensions | L 7700 x W 5000 x H 3200 mm |
| Weight | 11500 Kg |
| Availability | Immediately |
| Observations | *Information can sometimes be inaccurate and change without notice! |
Description
Metalworking - Vertical Machining Centre
Used Deckel Maho industrial machinery – DMU 100T from 2002 made in Germany located in Germany, with 30750H working hours. This vertical machining centre is equipped with a control unit Heidenhain TNC530i and has a working area of 1500 x 800 mm, 18000 rpm spindle speed, spindle power 30 kW.
Includes the following:
- Programmable B axis and C axis
- High pressure cooling up to 40 bar
- M&H 3d touch probe, tool measurement
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*