Vitap K2-2.0 - CNC Machining Center - 2019
Sold
Specifications
| Manufacturer | VITAP |
| Model | K2-2.0 |
| Year | 2019 |
| Condition | Used |
| Made in | Italy |
| Software control unit | TPA TPACAD TPAALBATROS |
| Y-axis travel | 1250 mm |
| Z-axis travel | 50 mm |
| Main motor power | 5 kw |
| Vertical drill spindles | 12 |
| Milling spindle | 1 |
| Spindle speed | 24000 rpm |
| Tool fixing system | ISO-30 |
| Interchangeable heads | 1 |
| Horizontal holes in X | 4 |
| Horizontal Y holes | 4 |
| Total power | 7 kw |
| Availability | Immediately |
| Observations | *Information can sometimes be inaccurate and change without notice! |
Description
Woodworking - CNC Machining Center
Used Vitap – K2-2.0 from 2019 made in Italy located in Spain, with 2840H working hours. This CNC machining centre is equipped with a control unit TPA TPACAD TPAALBATROS and has a 24000 rpm spindle speed, spindle power 7 kW.
Includes the following:
- Machine table Continuous feeding device
- Slot saws in direction X
- Special fixing system Pliers.
- DXF interface.
- CE regulations
- Vitap Bar Nesting
- Pair support
- Safety device Closed cabin
- Mechanical clamps, tools, tool holders and aggregates, possibly shown in the images, are not included
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*