Doosan DNM650 II - Vertical Machining Center - 2014
Sold
Specifications
| Manufacturer | DOOSAN |
| Model | DNM650 II |
| Year | 2014 |
| Condition | Used |
| Made in | South Korea |
| Control Unit | HEIDENHAIN iTNC530 |
| Working hours | 55514H |
| Spindle Working hours | 20379H |
| X-axis travel | 1270 mm |
| Y-axis travel | 670 mm |
| Z-axis travel | 625 mm |
| Table dimensions | 1300 x 670 mm |
| Spindle speed | 12000 rpm |
| Tool holder | BT-40 |
| Tool magazine slots | 30 |
| Max. Tool Length | 300 mm |
| Max tool weight | 8 kg |
| Spindle drive power | 15/18.5 kW |
| Dimensions | L 2762 x W 3350 x H 2850 mm |
| Weight | 8500 Kg |
| Availability | Immediately |
| Observations | *Information can sometimes be inaccurate and change without notice! |
Description
Metalworking - Vertical Machining Center
Used Doosan – DNM650 II from 2014 made in South Korea located in Germany, with 55514H working hours. This vertical machining centre is equipped with a control unit HEIDENHAIN iTNC530 and has a working area of 1300 x 670 mm, 12000 rpm spindle speed, spindle power 15/18.5 kW.
Includes the following:
- Chip conveyor
- Tool breakage sonde
- Mist collector
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*