Maho 500 C- CNC MIllling - 1983
|Control Unit||Philips 432/10|
|Working hours||+ -18.800|
|X-Axis travel||500 mm|
|Y-Axis travel||400 mm|
|Z-Axis travel||300 mm|
|Work table||700 x 350 mm|
|Spindle taper||ISO 40|
|Stroke of quill vertical||50 mm|
|Spindle speed||20-4000 rpm|
|Feed range||1-3000 mm/min|
|Feed traverse||5 m/min|
|Table load capacity||250 kg|
|Total power requirement||11.3 kW|
|Dimensions||L 2.100 x W 2.000 x H 2.000 mm|
|Observations||*Information can sometimes be inaccurate and change without notice!|
Metalworking - CNC Milling
Used Maho – 500 C from 1983 is made in Germany, with Working hours:+ -18.800. This CNC Milling is equipped with a Control Unit: Philips 432/10. The machine has a Work table: 700 x 350 mm, Total power requirement: 11.3 kW and is equipped with the following:
The original heidenhain 271 rod has been replaced by a heidenhain 780
The 432/10 is equipped with a drip feed. This makes it possible to load files from the computer, so you don't suffer from limited memory.
- with all books, cable diagrams, both digital and analog.
Also, I have many spare parts with the machine.
- all servo drives (x, y, z, b and spindle)
-full control (432/9)
-all glass rulers
- The machine is sold without tool holders, but can be purchased at an additional cost. The same applies to a very neat hydraulic machine clamp.
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*