Masterwood Project TF 100 2.0 - CNC Machining centers - 2021

Woodworking - CNC Machining centers

Used Masterwood – Project TF 100 2.0 from 2021 is made in Italy, with. This CNC machining centers is equipped with a control unit MASTERWORK. The machine has a motor 4.5 kW and is equipped with the following:+ 6-position MASTERWOOD tool changer, including 4.5 kW (6 HP) motor

with ISO 30 mount (without ISO cone).

With the tool changer,

the machine is approx. 11 cm wider.

+ MASTERWOOD tooling

Consisting of: HW dowel drill:

5 pcs 5 mm - GL 70.0 mm - blind hole

1 piece 5 mm - GL 70.0 mm - through hole

4 pcs 8 mm - GL 57.5 mm - blind hole

2 pcs 10 mm - GL 57, 5 mm - blind hole

1 piece 10 mm - GL 70.0 mm - blind hole

1 piece 8 mm - GL 70.0 mm - blind hole

1 piece 15 mm - GL 70.0 mm - blind hole

1 piece 35 mm - GL 70.0 mm -

Pocket drill 1 HW grooving saw blade d = 125mm, diameter = 20mm,

width = 4.0mm, 35 teeth

1 DIA drill, right - GL = 103 mm, NL = 43 mm,

Ø = 18 mm, shank = 20 x 50 mm, Z 1 + 1

1 DIA drill, left - GL = 103 mm, NL = 43 mm,

Ø = 18 mm, shank = 20 x 50 mm, Z 1 + 1

1 end mill VHW, right, D = 10 mm

Y direction vertical spindles: 5 pieces,

vertical spindles X - direction: 5 pieces,

+ MASTERWOOD folding roller conveyor

mounted on the front and / or rear

____

* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*