Vantage HSM 127A - Vertical Machining centers - 1999





ModelHSM 127A
Made inTaiwan
Control unitHeidenhain TNC
X-Axis travel1200 mm
Y-Axis travel700 mm
Z-Axis travel700 mm
Distance between spindle tip and table150 - 850 mm
Spindle center on top. column625/750 mm
Prestressed round bolt46 mm
Spindle taper connectionISO 40
Spindle diameter85 mm
Spindle revolutions80-8000 rpm
Spindle motor11/15 Kw
Table dimensions1300 × 605 mm
T-slots (width x number x pitch)18 x 4 x 125
Max weight From the workpiece table1.200 kg
X / Y axis rapid feeds15000 mm / min
Z-axis rapid feeds15000 mm / min
Tool magazine (double arm)24 pieces
Max tool weight 7 kg
Max tool diameter80 mm
Max tool length250 mm
Tool shankDIN69871A (BT40)
Observations*Information can sometimes be inaccurate and change without notice!


Metalworking - Vertical Machining centers

Used Vantage – HSM 127A from 1999 is made in Taiwan. This vertical machining centers is equipped with a control unit Heidenhain TNC. The machine has a , spindle revolutions 80-8,000 rpm and is equipped with the following: 

  • Tool locking system: German locking jaws
  • Remote electronic steering wheel
  • Chip evacuator
  • High pressure through the spindle
  • Education books


* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*