Weinig Unimat 17 (PFA17) - Milling machine - 1967
Specifications
| Manufacturer | Weinig |
| Model | Unimat 17 (PFA17) |
| Year | 1967 |
| Condition | Used |
| Transport roller spacing | 480 mm |
| Transport roller diameter | 170 mm |
| Number of rollers | 11 |
| Motor | 3PS |
| Dressing shaft | 5.5PS |
| Upper spindle | 7.5PS |
| All other shafts | 5.5 HP |
| Speed of the throat shafts | 6000 rpm |
| Spindle diameter | 40 mm |
| Working width | 200 mm |
| Working height | 120 mm |
| Dimensions | L 6000 x W 1500 x H 1500 mm |
| Availability | Immediately |
| Observations | *Information can sometimes be inaccurate and change without notice! |
Description
Woodworking - Milling machine
More info:
The profile milling machine has 7 working shafts. 1. spindle under the table (planer); 2nd spindle on the right (vane shaft); 3rd spindle on the left; 4th spindle on the right; 5th spindle on the left; 6. spindle horizontally below; 7. Spindle can be swiveled horizontally up, down, vertically left and 90 °. The machine is ideal for four-sided woodworking. Equipped with infinitely variable feed gear; Control range approx. 6-24m / min. with continuous feed rollers, the thickness shaft and all pressure elements, with a limit switch for limiting the up-down adjustment; Thickness shaft individually adjustable according to a tenth of a millimeter scale.
Slide rollers mounted on ball bearings in the table, finely adjustable. Hand lever adjustment to shut down the 1st feed roller.
___
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*