Okuma LU 300 M - CNC Lathe - 2005
|LU 300 M
|22 / 15 KW
|Motor powered tools
|L 3900 x W 2050 x H1950 mm
|*Information can sometimes be inaccurate and change without notice!
Metalworking - CNC Lathe / Turning Machine
The machine includes a cleaning system and high pressure of taladrina, motorized tool holder for gear milling. Two turrets. Upper turret with V12 motorized tools.
V8 lower turret. Interface to connect Autoblok rear window with hydraulic and programmable tracking in the lower turret.
Fully independent and programmable tailstock in Z axis movement and hydraulic fixing through M codes. Driven tools, The machine does not have a Y-axis, but it does have a C-axis. Prismatic guides on all axes. Double arm for automatic measurement of Renishaw tools.
Kitagawa platter on an 8-inch main head. Automatic effort control and tool consumption monitor. Parameterized automatic tool anti-collision system.
Turret change indexing time 0.2 seconds.
Head oil cooler. Automatic door opening and closing using M codes.
Interface to install a robot for automatic loading and unloading.
Flapper type chip extractor. Independent station for cleaning using filters and 40 bar high pressure pumps for coolant. Complete equipment including indoor and outdoor static tool holders. Complete equipment including axial and radial motorized tool holders and a special one for gear hobbing with a mother mill.
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*